Description
The measure is based on three points of reference: a minimum to indicate an urgent need for recharging, a means to indicate the possibility of recharging with remaining power or a pre-alert situation for a subsequent recharge, and a maximum to indicate that it has been recharged. .
These points activate alarms that instantly inform the fuel company so that it can meet its customers’ needs. At the same time, every 48 hours, a report on the status of the filling stations is sent to corroborate the alarms and enable possible diagnosis in case of system failure.
The method used to send the information is to send short SMS messages.
The team has approvals and certifications:
– II 1 / 2G Ex ia IIB T4, intrinsic safety, in an explosive atmosphere.
– Certificate of type LOM 03ATEX2151 X.
The equipment consists of a rectangular polycarbonate head loaded with fiberglass with a transparent cover and a PVC sheath with a SPANSIL® float, a highly chemical-resistant material.
In the casing, the three points are mounted using incandescent bulbs that, when closed by the passage of the magnet placed in the float, generate the signal that activates the corresponding alarm.
The connection to the reservoir is made using a four-hole flange.
The electronic components necessary for processing the signal provided by the casing are located in the head.
It operates autonomously with a non-rechargeable lithium battery of 3.6 V and 14 Ah, which lasts a long time.
