Level sensors for ADBLUE

The level sensors model CND3000, designed and manufactured by Cabeco, S.A. They are a PVC or INOX version for working at atmospheric pressure, in tanks containing ADBLUE.



need for urgent recharge, a means to indicate the possibility of a recharge with leftovers or a pre-alert situation for a next recharge, and a maximum to indicate that it has been recharged. It can also be configured to perform high precision measurements (2%)
These points activate alarms that notify, instantly, the ADBLUE supply company so that it can meet the needs of its client. At the same time, every 48 hours a report of the state of the setpoints is sent to corroborate the alarms and for a possible diagnosis in case of a system failure.
The method used to send the information is by means of short SMS messages
The team has the approvals and certifications:

– II 1 / 2G Ex ia IIB T4, intrinsically safe, in explosive atmospheres.
– Certificate of type LOM 03ATEX2151 X.

The equipment consists of a rectangular head made of fiberglass filled polycarbonate, with a transparent lid, and a PVC or INOX sheath, with a SPANSIL® float, a highly chemical resistant material, or INOX.

The subjection to the tank is by means of flange of four holes, although it can be totally customizable.
The electronics necessary for the signal processing provided by the sheath are located in the head.
It works autonomously powered by a non-rechargeable, 3.6V and 14AH lithium battery, of long duration (approximately 4 years)